Photovoltaic Solar Panel Inspections
Of course, the vast majority of solar panels are installed on sloping roofs which can make manual surveys by people difficult. Invasive scaffolding or a cherry picker may be required and there is always a risk of damage to the roof itself during the inspection process.
So, it’s not surprising that many people are put off by the cost and inconvenience of domestic solar panel inspections if there are no visible faults or issues evident from the ground.
However, thermal infrared inspections using a commercial Unmanned Aerial Vehicle (UAV or Drone) can complete a detailed PV panel inspection quickly, simply, and cheaply with the need for further maintenance only then being required if a fault issue is found. One simple inspection, every couple of years under the right solar irradiation conditions can be all that it takes to make sure that your solar panels stay safe and efficient. With many panels being covered by a long term warranty, there is a good chance that any fault repairs required will be at no additional cost to the home owner as well!
Drone Thermography of your solar panel can detect
All of these issues can be visualised without ever touching the panels or roof structure – making it the perfect routine inspection tool.
A UAV/Drone can be a fast and efficient diagnostic tool to pinpoint faults when electricity production has dipped. to be able to give to your panel maintenance provider.
Drone Media Imaging can deploy a thermal imaging camera via drone at very competitive rates, wherever you are in the UK. We can operate at reduced distances to other properties and people under our OSC (Operating Safety Case) which are unique enhanced operating permissions granted to us by the CAA. We are also qualified as category 2 thermographers which means that we understand the correct thermal conditions necessary to create meaningful and accurate data, along with the correct interpretation, and can provide you with a detailed inspection report which will show you where the faults are.
Just get in touch to discuss your requirements. Get in Touch
Thermography, a non-invasive technique using infrared imaging, has emerged as a powerful tool in the building industry. It is particularly useful for investigating building air pressure, air flow, and inefficient air leaks. This article explores the application of thermography in these areas, providing valuable insights and practical examples.
Discover the effects of thermal convection on building room corners with insights from thermal imaging. Uncover hidden insights.
Thermography, a non-invasive technique that uses infrared imaging to detect temperature variations, has emerged as a powerful tool in the field of building diagnostics. By capturing thermal images of structures, thermography enables professionals to identify areas of heat loss and energy inefficiency. This article explores the benefits of using thermography to pinpoint heat loss in structures, providing valuable insights into how this technology can help improve energy efficiency and reduce carbon emissions.
10m Take off & 20m Flight
Legally, drones are required to remain a 50m distance from People, Property, Vessels, and Vehicles that are not under the control of the pilot. We, however, have enhanced permissions from the CAA that means we can get as close as 10m, reducing the need to contact and liaise with your neighbours or closing roads to fly near them.
FLIGHT TIMES ARE SHORT AND SIMPLE
Solar panels are usually fitted on one side of your house roof, looking south to ensure that the maximum solar radiation is captured efficiently. This means that the flight need is very small and simple, it is just a case of flying up above the panels to the correct angle of incidence to collect the thermal images required. Our time at your property is very short.
WEATHER REQ FOR SOLAR INSPECTIONS
Solar panels need to be operating at full load for thermal inspection to take place and all errors/faults to be clearly seen, this is equivalent to 600 watts/m2 to meet BSI standards. (400 watts/m2 can be ok for some main issues). This means that we conduct solar panel inspection in the summer months ideally usually between May and September.