Solar Panel Faults
Understanding PID Fault in Solar Panels

PID (Potential Induced Degradation) is a common phenomenon that affects the performance and lifespan of solar panels. It occurs when the voltage potential between the solar cells and the frame of the panel creates a current flow, causing the cells to degrade over time. Understanding PID and taking steps to prevent it is critical for maximizing the efficiency and longevity of your solar panels.

Drone Media Imaging

CAA Certified with Enhanced OSC Permissions

Blog Subject

Author:

Potential Induced Degradation

Potential Induced Degradation (PID)
Potential Induced Degradation (PID)

PID Fault in Solar Panels

PID (Potential induced degradation) fault is a common issue that occurs in solar panels. PID can lead to significant power losses in solar panels, and if left unaddressed, it can cause long-term damage to the panels. Understanding the causes and solutions for PID fault can help solar panel owners to prevent this issue and maintain the performance of their panels.

Causes and Solutions for PID Fault in Solar Panels

Causes of PID Fault in Solar Panels

PID fault occurs when a voltage potential between the solar cells and the ground develops, resulting in the flow of an electric current. This current can cause the buildup of negative charges on the surface of the solar cells, leading to a reduction in the efficiency of the panels. The most common causes of PID fault include high humidity and temperature, a high concentration of salt, and the use of low-quality materials during installation.

Solutions for PID Fault in Solar Panels

There are several ways to prevent or mitigate PID fault in solar panels. One of the most effective solutions is the installation of an anti-PID system. This system works by connecting the solar panels to a ground wire, which helps to dissipate any voltage potential that may develop. Another solution is the use of high-quality materials during installation, such as cables and connectors that are resistant to humidity and salt.

It is also important to monitor the performance of solar panels regularly to identify any signs of PID fault. If you notice any reduction in the efficiency of your solar panels or any other unusual behavior, it is important to contact a qualified technician for inspection and repair.

PID fault is a serious issue that can impact the performance and lifespan of solar panels. Understanding the causes and solutions for PID fault can help solar panel owners to prevent this issue and maintain the efficiency of their panels. By taking proactive measures such as the installation of an anti-PID system and regular monitoring, solar panel owners can ensure that their panels provide reliable and sustainable energy for many years to come.

GET A QUOTATION

IEC Solar Inspection Services

We are certified thermographers, experienced in solar panel inspection to IEC standards. We can complete both the structured and compliant data capture through to the formal inspection report.

As approved drone pilots we work throughout the UK to provide both aerial and ground based thermography services. Fully insured and certified by the CAA with enhanced permissions for day and night time flights

GET A QUOTATION
MAKE AN ENQUIRY

Drone Services Enquiry

Thermography | Inspections | Solar | Photogrammetry

Discover how drone technology can enhance your operations with a free quotation from our experts. Get a Free Quote or Make an Enquiry Today!

MAKE AN ENQUIRY

related posts

  • © 2019 - Thermal Bridging in Commercial Buildings

    Thermal bridging in commercial buildings allows heat to escape or enter, increasing energy consumption and utility bills. It also leads to higher operational costs, maintenance expenses, and carbon emissions. Thermal imaging helps identify hidden thermal bridges, enabling targeted strategies to enhance energy efficiency and reduce costs.

  • © 2019 - 13 Months of Grain Store Fire Monitoring

    Thermal Fire Monitoring Following a Grain Store Terminal Explosion

    Grain Store Explosion and Year-Long Fire – July 5, 2020 – Tilbury Port, London On July 5, 2020, a series of events (possibly by a spark) triggered a large dust explosion and a subsequent fire at the Grain Store Terminal at the Port of Tilbury in London. This was a serious event that required the attention of a large-scale emergency response to get the subsequent grain fire under control and avoid additional explosions. No one was seriously hurt, which is nothing short of a miracle given the number of people on the scene and the amount of reinforced concrete and debris thrown high into the sky before raining down on the surrounding buildings.

    Traditional firefighting methods and techniques are ineffective in the case of grain storage fires. Using water to extinguish the inferno is ineffective with grain and dust fires, and the added weight might have caused a catastrophic structural collapse, exacerbating an already challenging situation. As a result, London fire teams were on the scene for days while a proper fire strategy and plan was developed and implemented, with staff always remaining on-site to monitor the situation over the following weeks.

    Throughout this early period, there was always the possibility of more explosions and the fire spreading since the grain stored in the linked silos generates dust that may ignite if the temperature is high enough. Drone Media Imaging was contracted to fly thermal imaging flights to collect temperature data to estimate fire spread and track fire management efforts over time. For instance, were the temperatures rising, falling, or remaining constant?

    We began operations on July 7, 2020, flying three flights each day, seven days a week initially, to compare temperatures and report back to crisis management teams and emergency service gold commanders. We eventually completed our thermal imaging missions one year and a month after the initial Grain Store explosion in late August 2021! While not all of the silos were full with grain, many were, and several were burning at temperatures far beyond 800°C. Before the fire could be quenched, the building had to be entirely demolished. Temperatures more than 80°C were still being recorded in the grain that remained on the ground after demolition 13 months later.

    Gaining safe access to the terminal to fly was not without difficulty, as emergency services had imposed a 50m exclusion zone surrounding the terminal due to the possibility of additional explosions. As a result, our risk assessments and method statements had to be developed specifically for this circumstance and rigorously tested to assure both safe drone flights and the most accurate thermal data gathering at this vital juncture.

    We continued to provide the Port of Tilbury London and the accompanying emergency services with daily and weekly calibrated temperature measurements that documented the progress of the grain store fire over 13 months. As thermal infrared aerial specialists, we provided data in the form of detailed reports, thermal imaging, RGB photographic and video footage.